IETF 81 Proceedings

Introduction  |  Area, Working Goup & BoF Reports  |  Plenaries  |  Training  |  Internet Research Task Force

RADIUS EXTensions (radext) (WG)

Minutes  | Audio Archives  |  Jabber Logs  |  Mailing List Archives

In addition to this official charter maintained by the IETF Secretariat, there is additional information about this working group on the Web at:
Additional RADEXT Web Page

Additional information is available at tools.ietf.org/wg/radext

Chair(s):

Operations and Management Area Director(s):

Operations and Management Area Advisor:

Technical Advisor(s):

Meeting Slides

Internet-Drafts:

Request for Comments:

Charter (as of 2011-09-29)

The RADIUS Extensions Working Group will focus on extensions to the
RADIUS protocol required to define extensions to the standard
attribute space as well as to address cryptographic algorithm
agility and use over new transports. In addition, RADEXT will
work on RADIUS Design Guidelines and define new attributes for
particular applications of authentication, authorization and
accounting such as NAS management and local area network (LAN) usage.

In order to enable interoperation of heterogeneous RADIUS/Diameter
deployments, all RADEXT WG work items MUST contain a Diameter
compatibility section, outlining how interoperability with
Diameter will be maintained.

Furthermore, to ensure backward compatibility with existing RADIUS
implementations, as well as compatibility between RADIUS and Diameter,
the following restrictions are imposed on extensions considered by the
RADEXT WG:

- All documents produced MUST specify means of interoperation with
legacy RADIUS and, if possible, be backward
compatible with existing RADIUS RFCs, including RFCs 2865-2869,
3162, 3575, 3579, 3580, 4668-4673,4675, 5080, 5090 and 5176.
Transport profiles should, if possible, be compatible with RFC 3539.

- All RADIUS work MUST be compatible with equivalent facilities in
Diameter. Where possible, new attributes should be defined so that
the same attribute can be used in both RADIUS and Diameter without
translation. In other cases a translation considerations
section should be included in the specification.


Work Items

The immediate goals of the RADEXT working group are to address the
following issues:

- RADIUS design guidelines. This document will provide guidelines for
design of RADIUS attributes. It will specifically consider how
complex data types may be introduced in a robust manner, maintaining
backwards compatibility with existing RADIUS RFCs, across all the
classes of attributes: Standard, Vendor-Specific and SDO-Specific.
In addition, it will review RADIUS data types and associated
backwards compatibility issues.

- RADIUS Management authorization. This document will define the
use of RADIUS for NAS management over IP.

-RADIUS attribute space extension. The standard RADIUS attribute
space is currently being depleted. This document will provide
additional standard attribute space, while maintaining backward
compatibility with existing attributes.

-RADIUS Cryptographic Algorithm Agility. RADIUS has traditionally
relied on MD5 for both per-packet integrity and authentication as well
as attribute confidentiality. Given the increasingly successful
attacks being mounted against MD5, the ability to support
alternative algorithms is required. This work item will
include documentation of RADIUS crypto-agility requirements,
as well as development of one or more Experimental RFCs providing
support for negotiation of alternative cryptographic algorithms
to protect RADIUS.

- IEEE 802 attributes. New attributes have been proposed to
support IEEE 802 standards for wired and wireless LANs. This
work item will support authentication, authorization and
accounting attributes needed by IEEE 802 groups including
IEEE 802.1, IEEE 802.11 and IEEE 802.16.

- New RADIUS transports. A reliable transport profile for
RADIUS will be developed, as well as specifications for
Secure transports, including TCP/TLS (RADSEC) and UDP/DTLS.

- Documentation of Status-Server usage. A document
describing usage of the Status-Server facility will be
developed.

Goals and Milestones:

Done  Updates to RFC 2618-2621 RADIUS MIBs submitted for publication
Done  SIP RADIUS authentication draft submitted as a Proposed Standard RFC
Done  RFC 2486bis submitted as a Proposed Standard RFC
Done  RFC 3576 MIBs submitted as an Informational RFC
Done  RADIUS VLAN and Priority Attributes draft submitted as a Proposed Standard RFC (reduced in scope)
Done  RADIUS Implementation Issues and Fixes draft submitted as an Informational RFC
Done  RADIUS Filtering Attributes draft submitted as a Proposed Standard RFC (split out from VLAN & Priority draft)
Done  RFC 3576bis submitted as an Informational RFC (split out from Issues & Fixes draft)
Done  RADIUS Redirection Attributes draft submitted as a Proposed Standard RFC (split out from VLAN & Priority draft)
Done  RADIUS Design Guidelines submitted as a Best Current Practice RFC
Done  RADIUS Management Authorization I-D submitted as a Proposed Standard RFC
Done  Reliable Transport Profile for RADIUS I-D submitted as a Proposed Standard RFC
Done  Status-Server I-D submitted as a Proposed Standard RFC
Dec 2010  IPv6 Access I-D submitted as a Proposed Standard RFC
Mar 2011  RADIUS over DTLS I-D submitted as an Experimental RFC
Mar 2011  RADSEC (RADIUS over TCP/TLS) draft submitted as an Experimental RFC
Mar 2011  RADIUS Crypto-agility Requirements submitted as an Informational RFC
Jun 2011  Extended Attributes I-D submitted as a Proposed Standard RFC
Oct 2011  IEEE 802 Attributes I-D submitted as a Proposed Standard RFC
Oct 2011  Dynamic Discovery I-D submitted as a Proposed Standard RFC

Internet SocietyAMSHome - Tools Team - Datatracker - Web Site Usage Statistics - IASA - IAB - RFC Editor - IANA - IRTF - IETF Trust - ISOC - Store - Contact Us
Secretariat services provided by Association Management Solutions, LLC (AMS).
Please send problem reports to: ietf-action@ietf.org.